Fixed window grilles and bars in Dagenham

How much should I budget for fixed window grilles and bars in Dagenham?

Fixed window grilles and bars in Dagenham typically cost £234 to £714 including VAT (£195 to £595 plus VAT) per window, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

A fixed window grille is a welded steel frame of bars bolted permanently over or inside a window. It has no moving parts and no lock to pick, which makes it the simplest and most economical grille for openings that are never used for access or escape.

What you can specify

No lock to maintain
Bar spacing chosen to stop entry while keeping light
Galvanised, powder-coated or both for external use
Welded steel frame with vertical bars or a grid
Decorative bar patterns available for visible elevations
Anti-tamper bolts or resin anchors into masonry

Fitting in Dagenham and nearby

We arrange surveys and fitting in Dagenham and across the RM10 postcode district, as well as in nearby Becontree (2 miles) and Romford (2 miles). Dates depend on installer availability.

London's buildings range from Victorian and Edwardian terraces and mansion blocks to post-war estates, with long high streets of ground-floor shops below flats.

Where fixed window grilles and bars are most often used:

Commercial back elevations
Rear storerooms and plant rooms
Basement and cellar windows
Outbuildings and workshops

What to think about first

Never needed for escape

A fixed grille should only go on a window that is not needed as an escape route. Bedrooms and upstairs habitable rooms usually need an openable alternative.

Appearance

On front elevations or period buildings a decorative or slimmer bar pattern may sit better than a plain grid.

Consents and safety: England

England

External grilles and planning

External grilles and shutters on shops and other commercial buildings normally need planning permission from the local council because they change the building's appearance. Many councils' shopfront guides favour internal, open-lattice grilles, particularly in conservation areas.

Bedroom and escape windows

Approved Document B (fire safety) expects many habitable rooms in houses, especially first-floor rooms, to have an emergency escape window with an unobstructed opening of at least 0.33 m², at least 450 mm high and 450 mm wide, with the bottom of the opening no more than 1,100 mm above the floor. We only fit grilles over escape windows with a release that opens from inside without a key.

How it works

Postcode and a few photos
On-site survey
Fixed written price
Fit, test and explain

Fixed window grilles and bars in Dagenham: questions

Do you cover Becontree as well as Dagenham?

Yes. As well as Dagenham, we can arrange surveys in nearby Becontree, Romford and Hornchurch, and elsewhere in Greater London.

Can fixed bars go on a bedroom window?

Generally no. Bedroom and upstairs habitable room windows often need to work as escape windows, so they should have an openable grille with a keyless internal release.

Can fixed grilles be removed later?

Yes, by unbolting them from inside, though anti-tamper fixings are deliberately awkward to remove.

Will fixed bars rust?

Galvanised and powder-coated steel is designed for years of outdoor use. Chips in the coating should be touched up to keep the protection intact.

Fixed window grilles and bars in nearby towns

Other grilles in Dagenham

Start with a guide price online, then we survey and fix the price in writing.