Fixed window grilles and bars in Battersea

How much should I budget for fixed window grilles and bars in Battersea?

As a guide, fixed window grilles and bars in Battersea cost £234 to £714 including VAT (£195 to £595 plus VAT) per window, supplied and fitted. The exact figure depends on size, type, finish and locking, and is confirmed in writing after the free survey.

A fixed window grille is a welded steel frame of bars bolted permanently over or inside a window. It has no moving parts and no lock to pick, which makes it the simplest and most economical grille for openings that are never used for access or escape.

What goes into a fixed grille

No lock to maintain
Welded steel frame with vertical bars or a grid
Made to measure for arched and odd-shaped openings
Decorative bar patterns available for visible elevations
Bar spacing chosen to stop entry while keeping light
Internal or external fixing

Fitting in Battersea and nearby

Surveys in Battersea (SW11) are booked around installer availability. We also cover nearby Chelsea (1 mile), Pimlico (1 mile) and Fulham (2 miles).

London's buildings range from Victorian and Edwardian terraces and mansion blocks to post-war estates, with long high streets of ground-floor shops below flats.

Where fixed window grilles and bars are most often used:

Outbuildings and workshops
Commercial back elevations
Basement and cellar windows
Rear storerooms and plant rooms

What to think about first

Appearance

On front elevations or period buildings a decorative or slimmer bar pattern may sit better than a plain grid.

Never needed for escape

A fixed grille should only go on a window that is not needed as an escape route. Bedrooms and upstairs habitable rooms usually need an openable alternative.

Consents and safety: England

England

External grilles and planning

External grilles and shutters on shops and other commercial buildings normally need planning permission from the local council because they change the building's appearance. Many councils' shopfront guides favour internal, open-lattice grilles, particularly in conservation areas.

Listed buildings and conservation areas

Listed buildings need listed building consent for works that affect their character, which can include internal grilles and their fixings. In conservation areas, councils look closely at anything fitted to the outside. We recommend speaking to the council's conservation officer before ordering.

How it works

Postcode and a few photos
On-site survey
Fixed written price
Fit, test and explain

Fixed window grilles and bars in Battersea: questions

Which areas near Battersea do you cover?

We can arrange work in Battersea and in nearby Chelsea (1 mile), Pimlico (1 mile) and Fulham (2 miles). Dates depend on installer availability.

Do fixed grilles need planning permission?

Internal fixed grilles usually do not. External grilles on front elevations, listed buildings or in conservation areas may need consent, so we check before ordering.

Can fixed bars go on a bedroom window?

Generally no. Bedroom and upstairs habitable room windows often need to work as escape windows, so they should have an openable grille with a keyless internal release.

How are fixed grilles attached?

With anti-tamper bolts or resin anchors into solid masonry, or to a steel subframe where the wall is weak. Fixings are positioned so they cannot be reached from outside.

Fixed window grilles and bars in nearby towns

Other grilles in Battersea

Start with a guide price online, then we survey and fix the price in writing.